Games We Play provides complete repair and restoration services on all the machines that we carry. Our highly skilled technicians will assist you in qualifying your repair needs and will ensure that you receive the absolute best service possible. If you would like to speak with someone regarding your repair needs, please Contact Us.
 
Games We Play Parts Directory

Below is a partial list of parts and supplies available. Call or e-mail us for things you are looking for and that aren't listed (and there are plenty of non-listed parts!). Disclaimer: Price and availibility subject to change. If you are a walk-in customer to our retail store, please state you saw these prices on our web page!

 
 
 
 
If you're ambitious, buy one of our used pinball machines 'as-is' and do the restoration yourself! It's easy using the parts below. And you'll learn a lot about your machine in the process.
 
Rubber Rings:
Nothing looks better on your pinball machines than new white rubber! That fresh, clean look can be yours!
 
Size
Color
Price
3/16'
White
35¢
5/16'
White
35¢
7/16'
White
35¢
3/4'
White
50¢
1'
White
50¢
1.25'
White
50¢
1.5'
White
50¢
2'
White
75¢
2.5'
White
75¢
2.75'
White
75¢
3'
White
75¢
Flipper
Black
75¢
Small Flipper
Red
75¢
Plunger Tips
Brown
50¢
Post Sleeves
Black
50¢
NOTE: New white rubber rings look cleaner on your machine than black rings. They are also softer (better ball bounce), and produce less dust. Black rings make more black dust, making your machine look dirty sooner. Black rings do last longer, but this is largely an illusion because you can't see the dirt and dust accumulation on them.
 
NOTE: Storing your white rubber rings under fluorescent lighting will turn them yellow due to the ultraviolet rays.
 
NOTE: Don't use your ball shooter with a worn or missing rubber plunger tip. The impact of the steel shooter rod against the ball will mushroom the top of the rod. After it mushrooms, it is difficult to remove the rod without cutting it.
 
Playfield and Flipper Parts:
  • Coil Sleeves - weak flippers or poppers? A simple replacement of the nylon coil sleeve can be all you need to fix this. Specify long, short, or short with lip. $1.00 each.
  • Williams Plunger and Link - if you have weak flippers, replacing the coil sleeve and the plunger and link is probably all you need to restore them to like-new condition. $3.95 each.
  • DataEast Plunger and Link - same as above, but for DataEast. $4.50 each.
  • Williams Plunger, Link and Crank - includes the flipper crank and the plunger and link, for newer Williams games. $9.95
  • DataEast Plunger, Link and Crank - for DataEast games. $10.95
  • Nylon Flipper Bushing - Williams Part #03-7568. Replaced everything else and your flippers are still weak? Try replacing the nylon insert that the metal flipper rod goes through. Mounts to the metal flipper plate, and extends through the playfield. If this part is worn, it can cause your flippers to drag on the playfield, causing playfield wear! $2.95
  • Coil Stops - for most manufacturers including Williams and DataEast. $2.99
  • Barrel, Flipper or Plunger Spring - $0.95
  • Williams Flipper - New $4.95
  • DataEast Flipper - New $4.95
  • Bally Flipper - Bally Part #C-116-5. New $4.95

  • Ball Shooter Sleeve (Williams) - New nylon ball shooter sleeve replaces worn sleeve for accurate ball launches. $0.95 each
  • Ball Shooter Rod - Brand new replacement. Specify Williams or DataEast $7.95

  • Standup Targets, Round. Various colors, 1' diameter, universal mount stand up targets fit in most games. Screw mounted leaf switch allows front or back bracket mounting. $9.95 each.
  • Standup Targets, Square. Various colors, 1' x 1' face, universal mount stand up targets fit in most games. Screw mounted leaf switch allows front or back bracket mounting. $9.95 each.
  • Standup Target, Rectangle. Various colors. 1' x 1/2' face, universal mount stand up targets fit in most games. Screw mounted leaf switch allows front or back bracket mounting. $9.95 each.

  • Playfield Glass. Replace that old, scratched playfield glass with new tempered glass. $39.00
  • Pinballs - 1 1/16' diameter. New chrome. The standard size for all recent machines. Do your game a real favor and buy it a NEW ball. An OLD orb with tiny scratches is like SANDPAPER on your playfield! $1.50 each
 
NOTE: Bamboo sticks (from shish-kabobs) and wood glue are a good fix for playfield holes that have been reamed out. Match stick and toothpicks also work. For permanent repair of a worn post hole, drill the hole all the way through and use a machine thread stud and a threaded T-nut.
 
Lamps:
Lamp#
Volts
Base Type
Price
#47
6.3
Bayonet
16¢ each
#44
6.3
Bayonet
16¢ each
#63
7
Bayonet
35¢ each
#89
13
Bayonet
35¢ each
#194
14
Wedge
29¢ each
#455
6.3
Bayonet-flash
90¢ each
#555
6.3
Wedge
18¢ each
#656
28
Wedge
25¢ each
#906/912
13/12.8
Wedge
50¢ each
#1683
 
 
$2.50 each
#1892
 
 
42¢ each
#1895
14
Bay
48¢ each
#2182
14
Wire terminal
70¢ each
#7373
14
Bi-pin
75¢ each
NOTE: Use #47 lamps instead of #44. They burn slightly dimmer than #44's, but draw less current and last longer. The also put less stress on the GI (general illumination) wiring and header pins. This is also a good idea where lights are under or inside plastic parts that can warp with heat.
 
NOTE: If you're going to buy a variety of lamps for general pinball restoration, get some #47's (or #44's), #555's, #89's (flashers) and #906/912's (flashers). These are the lamps used most often in today's pinball machines. If you're working on older 1980s games, just get #47's and #89's or #63's (flashers). If you are working on 1970s and prior EM games, get just #47's.
 
Displays:
  • 6 Digit Numeric display - brand new, glass only for Bally, Williams. $39.95
  • 7 Digit Numeric display - new, glass only for Bally, Williams. $39.95
  • 7 Digit AlphaNumeric - new, glass only for Bally, Williams. $44.95, L/6 $42.95 each.
  • 16 Digit AlphaNumeric - new, glass only for Bally/Williams. $49.95
  • 128 x 32 DOT MATRIX Module. Brand new complete unit used in all major manufacturers late model machines (Williams, Bally, Preimer, DataEast, Sega). Just plug it in to repair dim, fuzzy, dead line displays; no soldering required! $149.00
  • 128 x 32 DOT MATRIX Glass only. Brand new glass only for soldering into existing module as mentioned above. Can only be used on 'pin' type dot matrix modules (not for surface mount ribbon cable varients). Requires mucho desoldering and soldering to install. Not recommended for the faint of heart (buy the complete unit above instead!) $79.00
 
Integrated Circuits:
IC Number
Description
Price
2716
EPROM (pulls, not erased)
$1.00
2532
EPROM (pulls, not erased)
$5.00
2732
EPROM (pulls, not erased)
$1.00
2764
EPROM (pulls, not erased)
$1.00
27128
EPROM (pulls, not erased)
$3.95
27256
EPROM (pulls, not erased)
$5.95
27512
EPROM (pulls, not erased)
$8.95
27010
EPROM (pulls, not erased)
$9.95
27020
EPROM (pulls, not erased)
$11.95
27040, 32 pin
EPROM (pulls, not erased)
$9.95
27080
EPROM (new)
$15.95
555
(NE555) Timer IC
$1.50
LM339N
IC
$1.50
ULN2803A
IC
$4.50
4066
IC
$1.25
Z-80
CPU Microprocessor IC
$4.50
6502
CPU Microprocessor IC
$4.50
6800
CPU Microprocessor IC
$4.50
6802
CPU Microprocessor IC
$6.95
6809
CPU Microprocessor IC
$6.95
AY-3-8910
Sound processor (pulls)
$10.00
6116
RAM
$1.00
 
Diodes and Bridge Rectifiers:
Industry#
Description
Price
1N4001
100 volt Diode
$.25
1N4004
400 volt Diode
$.25
1N914
HiSpeed Switching Diode
$.25
3502W
Bridge Rectifier - 200v, 35amp - Wire leads
$7.95
3502L
Bridge Rectifier - 200v, 35amp - Lug leads
$7.95
 
Transistors:
Industry#
Description
Price
2N3440
Transistor
$4.25
2N3584
Transistor
$4.95
2N3904
Transistor
$.45
2N4403
Transistor
$.45
2N5060
Transistor
$.95
2N5401
Transistor (MPS-D52)
$.65
2N5550
Transistor
$.75
MPSA42
Transistor
$.75
MCR106-1
Transistor
$.95
TIP29
Transistor
$4.25
TIP31
Transistor
$1.40
TIP32
Transistor
$1.40
TIP36
Transistor
$4.95
TIP41C
Transistor
$1.50
TIP42
Transistor
$1.60
TIP47
Transistor
$1.70
TIP102
Transistor
$1.40
TIP110
Transistor
$1.50
TIP120
Transistor
$1.50
TIP121
Transistor
$1.50
TIP122
Transistor
$1.50
TIP125
Transistor
$2.00
NOTE: Use fresh white heat sink compound and new insulators when replacing a power transistor. This allows maximum heat transfer to the heat sink.
 
Switches:
Description
Price
Williams End of Stroke
$2.95
pre-1988 Bally End of Stroke
$2.95
Double Stack Switch
$4.95
Lane Change Switch
$2.95
Single Flipper Switch
$3.50
Double Flipper Switch
$4.95
 
Fuses:
Size
Type AGC (regular)
Type MDL (slo-blo)
1/4 amp
50¢ each,
$13.95/100
50¢ each,
$29.95/100
1/2 amp
50¢ each,
$13.95/100
50¢ each,
$29.95/100
1 amp
50¢ each,
$13.95/100
50¢ each,
$29.95/100
1-1/2 amp
50¢ each,
$13.95/100
50¢ each,
$29.95/100
2 amp
50¢ each,
$13.95/100
50¢ each,
$29.95/100
2-1/2 amp
50¢ each,
$13.95/100
50¢ each,
$29.95/100
3 amp
50¢ each,
$13.95/100
50¢ each,
$29.95/100
4 amp
50¢ each,
$13.95/100
50¢ each,
$29.95/100
5 amp
50¢ each,
$13.95/100
50¢ each,
$29.95/100
6 amp
50¢ each,
$13.95/100
50¢ each,
$29.95/100
7-1/2 amp
50¢ each,
$13.95/100
50¢ each,
$29.95/100
8 amp
50¢ each,
$13.95/100
50¢ each,
$29.95/100
10 amp
50¢ each,
$13.95/100
50¢ each,
$29.95/100
15 amp
50¢ each,
$13.95/100
50¢ each,
$29.95/100
20 amp
50¢ each,
$13.95/100
50¢ each,
$29.95/100
NOTE: Don't break off the ground pin on your pinball's AC wall plug. An ungrounded game can give a shock. The ground plug also allows voltage spikes to drain without damaging sensitive chips on your pinball pc boards.
 
NOTE: Replace connector pins and housings that have burned or discolored. This way you can see if the connector overheats in the future. Also if you replace a connector pin, also replace the corresponding header pin too! Don't forget to re-solder the other header pins on the boards to freshen old (cold) solder joints that have weakened due to heat.
 
Cabinet Parts:
  • AC Power cords - New. 8' long, heavy duty 3 wire molded plug. $4.95
  • Machine Legs, new - New black or chrome, 28.5' $14.95 each
  • Leg Bolts, used - used black or chrome, 5/8' acorn top $.50
  • Leg Bolts, new - 5/8' chrome $1.50
  • Leg Levelers - new 3' long $0.79

  • 25¢ Coin Mechanisms. - Turn your machine back into the coin sucking piggy bank it was designed to be. New $14.95 each, Used $6.95 each.
 
NOTE: Worn leg levelers scratch and gouge the floor when you slide the machine. New leg levelers allow smooth and safe gliding across hard surfaces.
 
Locks:

Locks come in two barrel lengths: 7/8' and 1-1/8' long. Please specify! Includes mounting nut and cam.

  • Round Tubular - Keyed alike available (please ask). $9.99
  • Single Bitted - by Fort. Keyed alike available (please ask). $4.95
  • Double Bitted - by Fort, $4.95
 
Coils:

We have most Bally, Williams, Gottlieb, and DataEast coils in stock. Call, fax, or email pinball4u@gmail.com for price. Most range from $4.95 to $19.95.
  • 090-5005-00
  • 090-5011-00
  • 090-5020-02
  • 090-5020-20
  • 090-5020-30
  • 090-5030-00
  • 090-5032-00
  • A-17875
  • A-26450
  • A-19300
  • A-20095
  • A-26451
  • A-27643
  • A-29876
  • AE-27-1200
  • AF-25-500
  • AF-28-1000
  • AE-24-900
  • AE-25-1000
  • A-4893
  • A-5194
  • A-5196
  • A-9736
  • A-9738
  • AE-23-800-03
  • AE-26-1200
  • AE-26-1500
  • AQ-25-500
  • AQ-27-1300
  • FL20-300
  • SFL-200-300
  • SG-23-850
  • FL-11753
  • FL-11722
  • FL-11630
  • FL-15411
  • FL-11629
 
Special Tools:
Tamper-Proof (Security) Torx Bit Set
Tamper-proof screws have a small nipple in the center of the screw that makes it near impossible to loosen without the proper bit. They are widely used in many arcade games. This set contains sizes T-10, T-15, T-20, T-25, T-30, T-35, and T-40. These commonly used sizes in arcade machines, but are difficult to find locally. $8.95
 
Playfield Cleaning Supplies:
  • NOVUS Plastic Polish #1 - large bottle. Great final cleaner for DiamondPlate playfields and plastic ramps. Use after Novus #2. $6.95
  • NOVUS Plastic Polish #2 - large bottle. Recommended by major pinball manufacturers as the cleaner of playfields and all plastics. Remove minor scratches. Excellent for one-step playfield care. $6.95
  • CP100 Playfield Cleaner - The 8 oz. blue bottle for non-mylar covered or non-Diamond Plate playfields. Excellent for removing deep dirt and removing old adhesives from playfield. $5.95
 
TIP: If you're going to buy just one type of Novus plastic polish, get #2. It's the one you'll use the most, and serves a wide variety of uses.
 
TIP: When cleaning newer pins, don't forget to remove the ramps under the playfield and clean them. Sure you can't see them, but they accumulate more dirt (which is picked up by the ball and spread all over) than ramps above the playfield!
 
TIP: Avoid using the playfield prop rod to support the playfield during repair on older games. The playfield plywood can twist and flex while on the support. This can create or aggravate lengthwise cracks in the playfield surface paint. Lean the playfield up against the backbox instead.